BGMGJ - LUBRIPLATE 630-AA
- MSDS: BGMGJ
- Manufacturer: FISKE BROTHERS REFINING CO
- Product Name: LUBRIPLATE 630-AA
- National Stock Number: 9150-01-109-8726
Product Identification
Product ID:LUBRIPLATE 630-AA
MSDS Date:01/01/1987
FSC:9150
NIIN:01-109-8726
MSDS Number: BGMGJ
Responsible Party
Emergency Phone: 201-589-9150
Cage: 9N579
Contractor
Telephone: 419-691-2491
Cage: 9N579
Ingredients
MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS: 8012-95-1
RTECS: PY8030000
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3/10 STEL;9192
LITHIUM SOAP
ACGIH TLV: NOT KNOWN
ADDITIVES- TYPE NOT SPECIFIED
ACGIH TLV: NOT KNOWN
Hazards
Effects of Overexposure:PROLONGED/REPEATED SKIN CONTACT MAY CAUSE MILD
IRRITATION.
First Aid
First Aid:SKIN: WASH THOROUGHLY W/SOAP & WARM WATER; EYES: FLUSH
W/CLEAR WATER FOR 15 MIN. OR UNTIL IRRITATON SUBSIDES. IF
IRRITATION PERSISTS, CONSULT A PHYSICIAN.
Fire Fighting
Flash Point:400F/204C COC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:DRY CHEMICAL, CO*2, WATER FOG OR WATER SPRAY.
Fire Fighting Procedures:USE AIR SUPPLIED BREATHING EQUIPMET FOR
ENCLOSED AREAS.
Unusual Fire/Explosion Hazard:DONOT MIX OR STORE W/STRONG OXIDANTS LIKE
LID. CHLORINE/CONCENT.O*2; //AVOID BRTHG VAPOR/FUMES.
Accidental Release
Spill Release Procedures:SCRAP UP GREASE;WASH RESIDUE W/APPROVED
PETROLEUM SOLVENT.KEEP PETROLEUM PRODUCTS OUT OF SEWERS & WATER
COURSES.ADIVSE APPROOPRIATE AUTHOITIES IF PRODUCT MAY OR HAS
ENTERED SUCH ENVIRONS.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOED WHEN NOT IN USE.
DONOT HANDLE OR STORE NEAR HEAT,SPARKS,FLAME OR STRONG OXIDANTS.
Other Precautions:AVOID BREATHING OIL MISTS.REMOVE OIL SOAKED CLOTHING
& LAUNDER BEFORE RE-USE.
Exposure Controls
Respiratory Protection:NORMALLY NOT NEEDED
Ventilation:USE LOCAL EXHAUST TO CAPTURE FUMES & VAPORS
Protective Gloves:OIL RESISTANT
Eye Protection:CHEMICALGOGGLES/SAFETY
Other Protective Equipment:USE OIL RESISTANT APRON IF NEEDED
Supplemental Safety and Health
MSDS UNDATED
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:>750F/>399C
Vapor Pres:<.1
Vapor Density:>14.
Spec Gravity:0.95
Evaporation Rate & Reference:(BU-AC =1 ) < 0.01
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT TAN GREASE W/MINERAL OIL ODOR
Percent Volatiles by Volume:NEGL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS:LIQUID CHLORINE, CONCENTRATED OXYGEN
Stability Condition to Avoid:MFR CITES NONE+SITUATIONS WHERE
HI-TEMPS/OXIDIZERS PRESENT
Hazardous Decomposition Products:MFR CITED NONE; CO*2, CO, OXIDES OF
ADDITIVES
Conditions to Avoid Polymerization:WILL NOT POLYMERIZE
Disposal
Waste Disposal Methods:ASSURE CONFOMITY WITH APPLIABLE DISPOSAL
REGULATIONS.DISPOSE OF ABSORBED MATERIAL AT AN APPROVED WASTE
DISPOSAL FACILITY OR SITE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.